Hey, where do you guys store your videos ?

Oct 22, 2016
35
35
Just lost my #6 drive. The newer of the bunch! 436 titles. Spins and chirps at the same rhythm. Happened when I was copying files to it.

How often were you using your #6 drive?

I have mine running on external 8x exclosure only when I'm copying files over when my internal is full and only turned on when I'm in the mood of viewing
 

WillEater

Well-Known Member
Mar 13, 2008
1,004
451
Hard drives have become the volume "loss leader" in many retail outlets.
When I buy, I check the date on the drive that starts the warranty period.
Why? you ask, well when the drive has been on the shelf in a warehouse for two years, it goes on sale at a reduced price.
In addition, mfgrs rate the drives for different service,
Drives that run at 5400 rpm are rated "Consumer", drives at 6000 are "Performance".
Then we have NAS rated drives, used in that NAS box you just spend coin for. (That's why they are pricy.
The wise man will RTFM..

Next, I wish to discuss "Bit Rot" for DVD and Blew-ray. (Pun intended.)
Check out some information here: http://www.makeuseof.com/tag/cds-truth-cddvd-longevity-mold-rot/

How Can I Increase The Lifetime Of My CDs & DVDs?
There are many ways you can increase the likelihood that your CDs and DVDs will last you a long time. Here is a selection of the most important ones:


  • Choose a high quality medium from a good brand.
  • If you want to maximize CD longevity, go for gold as a reflective layer.
  • Treat your CDs and DVDs with care, i.e. hold them by the outer edges or the hole in the center, don’t touch the surface, avoid scratches, and keep dirt from the disc.
  • Keep them in a dry, dark, and cool place since humidity, sunlight, high temperatures, and pollutants can damage the different layers.
  • Store them in jewel cases rather than paper slips.
  • Use non solvent-based felt-tip permanent markers, suitable for writing on CD or DVD labels.
  • Rewrite your rewritable discs as little as possible.
  • Choose slow writing speeds to reduce errors and increase quality.
What Can I Do When My Disc Won’t Read?
A disc that can no longer be read by your player or shows errors is not necessarily a lost case. Here area few tips for what you can do to:

  • Make sure you didn’t accidentally insert the CD or DVD upside down.
  • Carefully clean the bottom layer with alcohol to remove grease from fingerprints and dust.
  • Try to read the CD or DVD in a different player. Chances are that the laser in your player is faulty or that a different player can still read your CD or DVD.
 
Last edited by a moderator:

Casshern2

Senior Member...I think
Mar 22, 2008
7,017
14,455
How often were you using your #6 drive?

I have mine running on external 8x exclosure only when I'm copying files over when my internal is full and only turned on when I'm in the mood of viewing
That was my exact same behavior. I've heard that keeping it spinning keeps alive longer, but then others do what we do...only turn them on when we need them. The theory (or fact?) is that the wear and tear occurs when the disk is spinning up? Not too sure...but there it went. :(
 
Oct 22, 2016
35
35
That was my exact same behavior. I've heard that keeping it spinning keeps alive longer, but then others do what we do...only turn them on when we need them. The theory (or fact?) is that the wear and tear occurs when the disk is spinning up? Not too sure...but there it went. :(

Well...I just booted up my first 2006 external 500GB drive and it was still working fine. Though I'm planning to copy all it's content to a newer drive before anything goes wrong

well fuck the drive just died and wouldn't boot again HAHA
 
Last edited by a moderator:
  • Like
Reactions: Casshern2

Casshern2

Senior Member...I think
Mar 22, 2008
7,017
14,455
well fuck the drive just died and wouldn't boot again HAHA
Oh no!! Pry it out of the casing and try a docking station. If you're lucky it is only the USB interface hardware that's dead and it will spin up on a dock.
 
Oct 22, 2016
35
35
Oh no!! Pry it out of the casing and try a docking station. If you're lucky it is only the USB interface hardware that's dead and it will spin up on a dock.

I heard triple ticks everytime I boot it up, also it's IDE so I'll be ordering a IDE toaster to try and save the data
 

LoliKing25

Active Member
Jan 9, 2017
312
130
Just an FYI to everyone talking about dead drives. The drive isn't really dead, its the sata card inside (costs less than 50 cents for a new one).
 

LoliKing25

Active Member
Jan 9, 2017
312
130
That's the problem. They sell for 50 cents, but you have to buy a whole new thing thatd run you 60 bucks easily. It really sucks, cuz if you don't have connections than you cant find em. :(
 
  • Like
Reactions: Casshern2

colweb

Jade Collector
Uploader
Sep 2, 2010
506
1,983
Home server with a bunch of 2 TB drives in raid 5. And 2 workstations with a whole lot of internal and external drives. And some older machines and 2 laptops. In total about 60 TB, but half of it is used as backup.

When I need a new external drive I buy 2 of the same model, one to use and one for backup. Backup drives are usually not connected only when needed. Some of them have been in the closet for months while others are used weekly. Unfortunately it never takes very long for a hard drive to become full, no matter the size :( Once full and mostly used to read from the backup unit won't see daylight for a long time (hopefully).

The drives in the server run 24/7 and they fail more often then the external drives with auto sleep function. Seems keeping your drive running means be prepared to buy new ones sooner. But my home server also hosts websites so no option to shut it down or put it in sleep mode.
 
Last edited:

Casshern2

Senior Member...I think
Mar 22, 2008
7,017
14,455
Home server with a bunch of 2 TB drives in raid 5. And 2 workstations with a whole lot of internal and external drives. And some older machines and 2 laptops. In total about 60 TB, but half of it is used as backup.

When I need a new external drive I buy 2 of the same model, one to use and one for backup. Backup drives are usually not connected only when needed. Some of them have been in the closet for months while others are used weekly. Unfortunately it never takes very long for a hard drive to become full, no matter the size :( Once full and mostly used to read from the backup unit won't see daylight for a long time (hopefully).

The drives in the server run 24/7 and they fail more often then the external drives with auto sleep function. Seems keeping your drive running means be prepared to buy new ones sooner. But my home server also hosts websites so no option to shut it down or put it in sleep mode.
Good grief, that is a serious setup, my friend! Outstanding!

Yes, an HDD can and (probably) will fail at some point. Nice that you grab two at a time for backups. And, yes(!), let's hope you don't have to get those up and spinning often at all!

I'm still chugging along archiving on BD50 discs. It's actually time to pick up some more in a bit.
 

LoliKing25

Active Member
Jan 9, 2017
312
130
I was able to get my 13th drive two days ago. I traded my two oldest ones (a 1 and a 3) for a 5. Extra TB, but... I didn't know it was possible to be emotionally attached to a hard drive.
 

Casshern2

Senior Member...I think
Mar 22, 2008
7,017
14,455
I was able to get my 13th drive two days ago. I traded my two oldest ones (a 1 and a 3) for a 5. Extra TB, but... I didn't know it was possible to be emotionally attached to a hard drive.
Haha! It's like raising a kid!
 
  • Like
Reactions: LoliKing25

Casshern2

Senior Member...I think
Mar 22, 2008
7,017
14,455
I was able to get my 13th drive two days ago. I traded my two oldest ones (a 1 and a 3) for a 5. Extra TB, but... I didn't know it was possible to be emotionally attached to a hard drive.
Also, are you the type to now backup that 5TB drive? We here have seen it happen. Someone loses a 2TB drive (let alone a 5!) and there's no backup. All is lost. That's happened to me which is why I'm on 50GB BD now. If a disc fails...I'm only out 50GB worth of titles.